Bus Bar Insulators With Brass Screw, Sm Sb Type Bus Bar Insulator Busbar Insulator
1. We are specialty on epoxy resin medium voltage and high voltage components, such as 10KV, 24 KV and 40.5KV Circuit Breaker , Load breaker switch , Disconnecting Switch , Epoxy resin switchgear bushing , contactor box , insulators and transformer . 630A, 1250 A ,2500A , 3150A and 4000A contact box , club contact , fix contact, arm contact and jaw contact . 630A and 1250A VS1 circuit breaker . 630A and 1250A ZN85-40.5 circuit breaker . 12KV and 24KV earth switch. KYN28A-12 and KYN61 high voltage switchgear components .
2. The load switch adopts the pressure gas internal blowing structure, the arc extinguishing ability is strong, and does not affect the interphase and ground insulation, both the dynamic and static contacts have the arc contact, greatly increased the number of breakdowns.
3. The fuse and the load switch room form the transformer protection circuit. The high voltage flow limiting fuse is installed in the insulated shell of epoxy pouring. After the fuse is broken, the firing pin is ejected and the load switch is divided.
| Item | Technical data |
| Rated voltage (KV) | 3.6 | | 12 | 24 | 40.5 |
| Rated frequency(Hz) | 50 |
| Insulator(capacity) | insulating | Frequency withstand voltage 5 min (KV) | 25 | | 42 | | 100 |
| Frequency withstand voltage 1 min (V) | 2000 |
| Lighting impulse withstand voltage (KV) | 40 | | 75 | | 185 |
| Local discharge (pc) | ≤10 |
| Dispute bend (N) | ≥10000 |
| Length | 140mm |
FAQ:
1.Q:What's your main products?
A: insulators, hardware of all kinds for high-voltage applications and related products.
2. Q: Can I get some samples?
A: Yes, sample order is available for quality check and market test.
3. Q:How can you control your quality?
A:For each production processing, we have complete QC system for the chemical composition, physical and electrical properties. After production, all the goods will be tested according to related standards, and the ex-factory test reports will be sent along with shipment documents.
4. Q:Does your company accept customization?
A:We accept OEM service.
5 Q: Do you have the products in stock?
A: Depends on your request,we have standard models in stock.Some special product and big order will be newly produced according to your order.
6 Q: What do you have for certificate?
A: ISO9001, ISO14001, Type test, CESI etc.
7.Q:Can we visit your company?
A:Yes, for sure, you are welcome to visit our company.
Product Tags:
|
|
10KV Epoxy Resin Busbar Insulator With Brass Screw Sm Sb Type Images
|
